Ski Boot Orthotics: Plowing Through The Options

Clinical Editor: Howard Dananberg, DPM
For about $150 to $200, you can have the soles of the boots ground and then the boots are built up back to DIN (industry binding and boot standards). However, Wax notes that canting without an orthotic or custom insole to stabilize the interface between the boots and the feet is “useless.” Until you stabilize the foot and ankle in the boot, you can’t get a reliable interpretation of what type of out-of-boot canting will help, notes Wax. Once the foot is stabilized, you can determine the relaxed position of the center of mass of the knee at the tibial plateau, which he says should fall just inside of the center of the axis of the patient’s foot in the ski boot. “Canting outside the boot is great. It really helps but not as much as an orthotic and not without an orthotic. I don’t know any top boot fitters who cant someone without them having a good orthotic in the boot,” emphasizes Wax. Dr. Dananberg says changes to the inside of the boot with a custom foot orthotic are best used to manage the varus relationships of the foot itself, excluding the leg influence. “On a fairly routine basis, I do use first ray cutouts to permit plantarflexion of the first metatarsal (since) controlling the inside edge of the boot against the snow is of major significance,” explains Dr. Dananberg. Dr. Dananberg says when the first metatarsal is posted in varus, it increases the difficulty of first ray plantarflexion and seems to exacerbate control and pain issues. He also advises that you make sure the medial arch of the orthotic is not excessively high. Dr. Dananberg says taking this precaution seems to enhance comfort, particularly during the break-in period. Wax adds that Tecnica Ski Boots have a cuff alignment mechanism (dual pivot adjustment) that actually assists alignment and sometimes negates the need for canting the boot. As Wax points out, most “canting adjustment” mechanisms on ski boots are really geared toward lower leg cuff alignment. He says they are effective in helping the upper cuff follow the shaft of the lower leg, which prevents deflection of the lower leg away from the axis of the boot and ski. Q: What other comfort features would you recommend to enhance the skier’s experience? A: All three panelists mention toe heaters. The heaters use a small disk added to the sock liner or orthotic in the boot, directly under the toes. Combined with a rechargeable battery pack, the heaters can provide an all day heat source. Wax feels rechargeable batteries work the best in boot heaters. Dr. Dananberg says the toe heater feature is “far and away” his favorite and notes that several models are available. Dr. Dananberg and Wax also cite the better wicking materials used for hosiery. When the feet can be kept dry, they feel far less cold. Keep in mind, however, that these materials do wick the moisture to the boot liner, according to Dr. Dananberg. It is important to allow these to dry out at night so as not to put on a wet boot on that next cold winter morning. “While ‘heat’ may not be the right word, they do prevent that ‘freezing’ feeling on even the coldest days,” notes Dr. Dananberg. Dr. Dananberg (pictured) practices in Bedford, N.H. Dr. Schneider has practices in Vail, Aspen, Carbondale and Frisco, Colo. He designed the Snowthotic and formerly owned the South Shore Ski and Sport in Cedarhurst, N.Y. Mr. Wax has been running Inner Bootworks in Stowe, Vt. since 1997. He has been fitting ski boots since the mid-1970s and became a certified pedorthist in 1999.

Add new comment